Difference between revisions of "iRefScape Test Cases 1.0"

From irefindex
(Migrated more tests.)
(Migrated more tests. Tidied up the untested area details.)
Line 453: Line 453:
 
| valign="top" | <pre>10551855 11401546</pre>
 
| valign="top" | <pre>10551855 11401546</pre>
 
| No results are returned (since space-delimited queries are not supported)
 
| No results are returned (since space-delimited queries are not supported)
 +
|
 +
|-
 +
| colspan="5" | The following example searches are listed in the [[README_Cytoscape_plugin_0.8x#Using_the_Search_Panel|Using the Search Panel]] documentation.
 +
|-
 +
| valign="top" | <pre>Q7KSF4</pre>
 +
| valign="top" | <pre>UniProt_Ac</pre>
 +
| valign="top" | <pre>Taxon id: Any
 +
Iterations: 1
 +
Create new view: yes
 +
Use canonical expansion: yes</pre>
 +
| 67 nodes, 146 edges
 +
|
 +
|-
 +
| colspan="5" | '''Notes:''' 4 nodes are returned directly by the query, but only one is marked with i.query = Q7KSF4.  FAIL nodes returned by a query (even with canonical expansion) should have an i.query value. i.order is 0 for Q7KSF4 but 10 for the other three nodes from the same canonical group.  CAUTION.  This is not what the documentation says for these attributes.  With canonical expansion off, this search returns 43 nodes, 43 edges all from BioGRID.
 +
|-
 +
| valign="top" | <pre>NP_996224</pre>
 +
| valign="top" | <pre>RefSeq_Ac</pre>
 +
| valign="top" | <pre>Taxon id: Any
 +
Iterations: 1
 +
Create new view: yes
 +
Use canonical expansion: yes</pre>
 +
| 67 nodes, 146 edges
 +
|
 +
|-
 +
| colspan="5" | '''Notes:''' See above. i.query feature fails to update to reflect the most recent search.  FAIL.
 +
|-
 +
| valign="top" | <pre>Q7KSF4_DROME</pre>
 +
| valign="top" | <pre>UniProt_ID</pre>
 +
| valign="top" rowspan="2" | <pre>Taxon id: Any
 +
Iterations: 1
 +
Create new view: yes
 +
Use canonical expansion: yes</pre>
 +
| 67 nodes, 146 edges
 +
|
 +
|-
 +
| valign="top" | <pre>42066</pre>
 +
| valign="top" | <pre>geneID</pre>
 +
|
 +
| 67 nodes, 146 edges
 +
|
 +
|-
 +
| colspan="5" | See above. Now two nodes are marked as Q7KSF4 under i.query.  FAIL.  42066 should be listed for the recently returned node.
 +
|-
 +
| valign="top" | <pre>cher</pre>
 +
| valign="top" | <pre>geneSymbol</pre>
 +
| valign="top" | <pre>Taxon id: Any
 +
Iterations: 1
 +
Create new view: yes
 +
Use canonical expansion: yes</pre>
 +
| 67 nodes, 146 edges
 +
|
 +
|-
 +
| colspan="5" | Now i.query says Q7KS4 for all four nodes returned by the search.  FAIL.
 +
|-
 +
| valign="top" | <pre>72854<-->72866</pre>
 +
| valign="top" | <pre>mass</pre>
 +
| valign="top" | <pre>Taxon id: Any
 +
Iterations: 1
 +
Create new view: yes
 +
Use canonical expansion: yes</pre>
 +
| 40 nodes, 94 edges
 +
|
 +
|-
 +
| colspan="5" | Four molecular mass values are returned by the query helper.  Selecting all of these and doing the search returns 8 hi-lited nodes and their interactors.  The 72855 mass node returns 1 node with that mass and two other members of the same canonical group.  Two of the nodes are returned with i.query of Q7KSF4.  FAIL.
 +
|-
 +
| valign="top" | <pre>10121899</pre>
 +
| valign="top" | <pre>rog</pre>
 +
| valign="top" | <pre>Taxon id: Any
 +
Iterations: 1
 +
Create new view: yes
 +
Use canonical expansion: yes</pre>
 +
| This should return the Q7KSF4 node
 +
|
 +
|-
 +
| colspan="5" | Instead got "Sorry, please wait until current operations finish or stop the proces and restart Cytoscape."  Subsequent searches do not work.  Have to restart Cytoscape
 +
|-
 +
| valign="top" | <pre>14605208</pre>
 +
| valign="top" | <pre>PMID</pre>
 +
| valign="top" | <pre>Taxon id: Any
 +
Iterations: 1
 +
Create new view: yes
 +
Use canonical expansion: yes</pre>
 +
| 929 nodes and 1605 edges returned all with PMID of 14605208
 +
|
 +
|-
 +
| colspan="5" | Same results if iteration is set to 0. Ok.  Same results if canonical expansion is de-selected.  Ok. 
 +
|-
 +
| valign="top" | <pre>47513</pre>
 +
| valign="top" | <pre>src_intxn_id</pre>
 +
| valign="top" rowspan="5" | <pre>Taxon id: Any
 +
Iterations: 1
 +
Create new view: yes
 +
Use canonical expansion: yes</pre>
 +
| 2 nodes and 1 edge returned
 +
|
 +
|-
 +
| valign="top" | <pre>EBI-212627</pre>
 +
| valign="top" | <pre>src_intxn_id</pre>
 +
|
 +
| 2 nodes and 4 edges returned (2 from intact, 1 from BIND and 1 from MINT)
 +
|
 +
|-
 +
| valign="top" | <pre>147805</pre>
 +
| valign="top" | <pre>src_intxn_id</pre>
 +
|
 +
| Returns 4 nodes and three interactions because BIND and BioGRID interaction id space overlap
 +
|
 +
|-
 +
| valign="top" | <pre>227650</pre>
 +
| valign="top" | <pre>omim</pre>
 +
|
 +
| 74 nodes and 224 edges returned
 +
|
 +
|-
 +
| valign="top" | <pre>449</pre>
 +
| valign="top" | <pre>digid</pre>
 +
|
 +
| 58 nodes and 60 edges returned
 +
|
 +
|-
 +
| colspan="5" | This should return the same results as omim 227650 plus more nodes that have the same digid.  digid search is like searching for multiple omims.  Problem with file name _EXT__ROG_digid.irft
 +
|-
 +
| valign="top" | <pre>fanconi</pre>
 +
| valign="top" | <pre>dig_title</pre>
 +
| valign="top" | <pre>Taxon id: Any
 +
Iterations: 1
 +
Create new view: yes
 +
Use canonical expansion: yes</pre>
 +
|
 
|
 
|
 
|}
 
|}
Line 579: Line 708:
 
|
 
|
 
|}
 
|}
 +
 +
=== Not currently tested ===
 +
 +
* src_intxn_id search 1
 +
* omim search 1
 +
* digid search 1
 +
* audit against external database - Intact
 +
* audit against external database - MINT
 +
* audit against external database - BioGRID
 +
* iterations 1
 +
* use canonical expansion 1
 
    
 
    
 
=== User interface notes ===
 
=== User interface notes ===
Line 596: Line 736:
 
The CXCR4 isoforms test can be used as a test case for the Export function "on Target network Node ID type"= i.Canonical_ROGID_TOP
 
The CXCR4 isoforms test can be used as a test case for the Export function "on Target network Node ID type"= i.Canonical_ROGID_TOP
  
 +
== Currently untested areas ==
  
===Test case name: src_intxn_id search 1===
+
* Preferences
 
+
* iRefScape menu
===Test case name: omim search 1===
+
* Right-click menu
 
+
* Node attributes
===Test case name: digid search 1===
+
* Edge attributes
 
+
* Wizard
 
+
* Installation
 
+
* Help system
 
+
* Windows and sessions
===Test case name: example search 1===
+
* Loading from file
 
 
'''Operation: '''
 
 
 
Test the example searches listed at http://irefindex.uio.no/wiki/README_Cytoscape_plugin_0.8x#Using_the_Search_Panel
 
 
 
Query box: see below
 
 
 
Search type: see below
 
 
 
Taxon id: Any
 
 
 
Iterations: 1
 
 
 
Create new view: yes
 
 
 
Use canonical expansion: yes
 
 
 
'''Expected Observation: '''
 
 
 
{|class="wikitable" style="text-align:left" border="1" cellpadding="5"
 
!width="50" align="center" style="background:#f0f0f0;"|Search Type
 
!width="50" align="center" style="background:#f0f0f0;"|Example
 
!width="500" align="center" style="background:#f0f0f0;"|Results
 
|-
 
| UniProt_Ac||Q7KSF4||67 nodes, 146 edges.  4 nodes are returned directly by the query, but only one is marked with i.query = Q7KSF4.  FAIL nodes returned by a query (even with canonical expansion) should have an i.query value. i.order is 0 for Q7KSF4 but 10 for the other three nodes from the same canonical group.  CAUTION.  This is not what the documentation says for these attributes.  With canonical expansion off, this search returns 43 nodes, 43 edges all from BioGRID.
 
|-
 
| RefSeq_Ac||NP_996224||67 nodes, 146 edges. See above. i.query feature fails to update to reflect the most recent search.  FAIL.
 
|-
 
| UniProt_ID||Q7KSF4_DROME||67 nodes, 146 edges. 
 
|-
 
| geneID||42066||67 nodes, 146 edges. See above. Now two nodes are marked as Q7KSF4 under i.query.  FAIL.  42066 should be listed for the recently returned node.
 
|-
 
| geneSymbol||cher||67 nodes, 146 edges. Now i.query says Q7KS4 for all four nodes returned by the search.  FAIL.
 
|-
 
| mass||72854<-->72866||40 nodes, 94 edges. Four molecular mass values are returned by the query helper.  Selecting all of these and doing the search returns 8 hi-lited nodes and their interactors.  The 72855 mass node returns 1 node with that mass and two other members of the same canonical group.  Two of the nodes are returned with i.query of Q7KSF4.  FAIL.
 
|-
 
| rog||10121899||FAIL.  This should return the Q7KSF4 node.  Instead got "Sorry, please wait until current operations finish or stop the proces and restart Cytoscape."  Subsequent searches do not work.  Have to restart Cytoscape
 
|-
 
| PMID||14605208||929 nodes and 1605 edges returned all with PMID of 14605208.  SAme results if iteration is set to 0. Ok.  Same results if canonical expansion is de-selected.  Ok. 
 
|-
 
| src_intxn_id||47513|| 2 nodes and 1 edge returned.
 
|-
 
| src_intxn_id||EBI-212627|| 2 nodes and 4 edges returned (2 from intact, 1 from BIND and 1 from MINT).  Ok
 
|-
 
| src_intxn_id||147805||Returns 4 nodes and three interactions because BIND and BioGRID interaction id space overlap.
 
|-
 
| omim||227650||74 nodes and 224 edges returned.  Ok.
 
|-
 
| digid||449||58 nodes and 60 edges returned.  FAIL.  This should return the same results as omim 227650 plus more nodes that have the same digid.  digid search is like searching for multiple omims.  Problem with file name _EXT__ROG_digid.irft
 
|-
 
| dig_title||fanconi|| FAIL - do not fix until next release. 
 
|-
 
|}
 
 
 
 
 
 
 
'''Last tested: June 7, 2010'''
 
 
 
'''Plugin Version: '''0.83
 
 
 
'''Data Version: '''7.0 public
 
 
 
<span style="color:red">'''Result: '''NOT TESTED</span>
 
 
 
'''Tester: '''Ian
 
 
 
'''Notes: '''
 
 
 
===Test case name: audit against external database - Intact===
 
 
 
===Test case name: audit against external database - MINT===
 
 
 
===Test case name: audit against external database - BioGRID===
 
 
 
===Test case name: iterations 1===
 
 
 
===Test case name: use canonical expansion 1===
 
 
 
==Advanced options cases==
 
 
 
 
 
==Preferences==
 
 
 
===Test case name: what is being tested #===
 
 
 
'''Operation: '''
 
 
 
'''Expected Observation: '''
 
 
 
'''Last tested: July 8, 2010'''
 
 
 
'''Plugin Version: 0.83'''
 
 
 
'''Data Version: 7.0'''
 
 
 
<span style="color:red">'''Result: '''NOT TESTED</span>
 
 
 
'''Tester: Ian'''
 
 
 
'''Notes: '''
 
 
 
==iRefScape menu cases==
 
 
 
==Right-click menu cases==
 
 
 
==Node attribute cases==
 
 
 
==Edge attribute cases==
 
 
 
==Wizard cases==
 
 
 
==Installations cases==
 
 
 
==Help cases==
 
 
 
==Windows and sessions cases==
 
 
 
 
 
===Test case name: Load from file search 1 #===
 
 
 
 
 
==Test case template==
 
 
 
===Test case name: what is being tested #===
 
 
 
'''Operation: '''
 
 
 
'''Expected Observation: '''
 
 
 
'''Last tested: '''
 
 
 
'''Plugin Version: '''
 
 
 
'''Data Version: '''
 
 
 
<span style="color:red">'''Result: '''NOT TESTED</span>
 
 
 
'''Tester: '''
 
 
 
'''Notes: '''
 
  
 
==To be corrected==
 
==To be corrected==
Line 757: Line 758:
 
*Ending with collapsed node error
 
*Ending with collapsed node error
 
*unselect all nodes before edge filtering
 
*unselect all nodes before edge filtering
 
  
 
==List of GeneIDs to test the new caonical expansion==
 
==List of GeneIDs to test the new caonical expansion==

Revision as of 13:49, 18 May 2011

Last edited: 2011-05-18


Search cases

All tests have been performed against iRefIndex 8.1 data.

Query Search Type Options Expected Result Pass/Fail
Q39009
Q9ZNV8
UniProt_Ac
Taxon id: Any
Iterations: 1
Create new view: no
Use canonical expansion: no
Add edges between neighbours: no
33 nodes, 94 edges. 2 queried nodes are blue (DMC_ARATH and AHP2_ARATH) Pass
Node AHP2_ARATH linkout from i.RefSeq_Ac_TOP attribute (NP_189581) to Entrez Protein gives http://www.ncbi.nlm.nih.gov/protein/NP_189581?report=GenPept Pass
i.taxid is 3702 and i.geneID is 822593 Pass
Node AHP2_ARATH linkout from i.UniProt_Ac_TOP attribute (Q9ZNV8) to UniProt/KB beta gives http://www.uniprot.org/uniprot/Q9ZNV8 Pass
UniProt record agrees with iRefScape on iRefSeq_Ac_TOP (see "Sequence databases"), i.taxid, i.geneID (see "Genome annotation databases") Pass
Two edges between query nodes are EBI-1555390, EBI-1555417 Pass
Linkouts for query node edges (i.src_intxn_id) to Intact ("Interaction databases") provide PubMed #17937504 which should match i.PMID, and an interaction detection method of "anti tag coip" which should match i.method_name Pass
The molecule names are DMC1 and ATHP1 in IntAct and these names should be available under the i.interactor_alias node attribute Pass
Both interactions should have http://wodaklab.org/iRefWeb/interaction/show/102203 as i.iRefWEB Pass
Taxon id: Any
Iterations: 0
Create new view: no
Use canonical expansion: no
Add edges between neighbours: no
2 nodes, 3 edges; 2 queried nodes are blue (DMC_ARATH and AHP2_ARATH) and are connected by two edges Pass
Q39009-1
Q9ZNV8-2
Taxon id: Any
Iterations: 1
Create new view: no
Use canonical expansion: no
Add edges between neighbours: no
Return the same results as for UniProtKB: the isoform information is ignored when searching Pass
Q39009.1
Q9ZNV8.2
Returns no results. Version information is not a valid annotation for UniProtKB. Pass
NP_188928.2
RefSeq_Ac
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: no
11 nodes, 29 edges. i.RefSeq_Ac = NP_188928 was returned; edges returned include EBI-1555390, EBI-1555417 between DMC1_ARATH and AHP2_ARATH Pass
NP_188928
The same results are returned Pass
NP_188928.567
The same results are returned Pass
188928
No results are returned Pass
NP 188928
No results are returned Pass
NP_188928.2
UniProt_Ac
No results are returned Pass
NP_188928.2
geneID
No results are returned Pass
NP_188928.2
geneSymbol
No results are returned Pass
NP_188928.2
ipi
No results are returned Pass
NP_188928.2
mass
No results are returned Pass
NP_188928.2
rog
No results are returned Pass (no error given, though)
AHP2_ARATH
UniProt_ID
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: no
26 nodes, 67 edges Pass
AHP2
No results are returned Pass
AHP2 ARATH
No results are returned Pass
ARATH
No results are returned Pass
AH2_ARATH
No results are returned Pass
AHP2_ARATH.2
No results are returned Pass
AHP2_ARATH
UniProt_Ac
No results are returned Pass
AHP2_ARATH
geneID
No results are returned Pass
AHP2_ARATH
geneSymbol
No results are returned Pass
AHP2_ARATH
ipi
No results are returned Pass
821860
822593
geneID
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: no
33 nodes and 94 edges. (Should return the same result as a UniProt_Ac query for Q39009 and Q9ZNV8.) Pass
821860
geneID
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
1 node Pass
821860
geneSymbol
No results are returned Pass
821860
UniProt_Ac
No results are returned Pass
821860
UniProt_ID
No results are returned Pass
1234
geneID
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: no
47 nodes and 158 edges Pass
All geneIds from a search for
1234
(45 values producing 44 unique gene identifiers)
geneID
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
80 nodes and 733 edges (upon last attempt)
Note: This test is made incredibly difficult by the apparently unreliability of the export function.
CXCR4
geneSymbol
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
2 nodes Pass
P61073-2
UniProt_Ac
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
2 nodes (CXCR4 and CXCR4_HUMAN) Pass
P61073
UniProt_Ac
1 node (CXCR4_HUMAN) Pass
P61073-2
UniProt_Ac
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: yes
2 nodes (CXCR4 and CXCR4_HUMAN) Pass
P61073
UniProt_Ac
2 nodes (CXCR4 and CXCR4_HUMAN) Pass
Note: P61073-2 and P61073 are isoforms of CXCR4. Searching for P61073-2 actually results in the removal of the "-2" and a search for all isoforms, under the assumption that the user is unsure which isoform should be retrieved; as a result, all isoforms are returned, even though a specific isoform was requested. In contrast, the search without a "-" character results in just one protein with that exact name being returned.
CXCR
geneSymbol
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
No results are returned Pass
CXCR4
2 nodes with i.UniProt_Ac_TOP set to P61073 and P61073-2 Pass
cxcR4
Pass
CXC
CXCR
CXCR4
Pass
Note: no indication is given that CXC and CXCR failed to provide matches when the successfully used CXCR4 term is present. Maybe some feedback could be given about this.
CXCR5
geneSymbol
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
3 nodes Pass
CXCR5
UniProt_ID
No results are returned Pass
PTK2
geneSymbol
6 nodes (involving 5 taxons) Pass
RPB1
geneSymbol
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
1 node (RPB1_SCHPO) Pass
Taxon id: 4932
Iterations: 0
Create new view: yes
Use canonical expansion: no
No results returned (even though an alias for yeast RPO21, gene identifier 851415, is RPB1, this search only searches on official gene symbols from Entrez Pass
Taxon id: 9606
Iterations: 0
Create new view: yes
Use canonical expansion: no
No results returned Pass
5366033
rog
Taxon id: Any
Iterations: 1
Create new view: no
Use canonical expansion: no
2 nodes (POL_HV1H2 and POL_HV1B1 interacting with it) Pass
IPI00543858
IPI00517160
ipi
Taxon id: Any
Iterations: 1
Create new view: no
Use canonical expansion: no
33 nodes, 94 edges. 2 queried nodes are blue (DMC_ARATH and AHP2_ARATH) Pass
IPI00543858.1
IPI00517160.1
Pass
00543858
00517160
Pass
00543858
0051716
33 nodes, 94 edges, but only after IPI00517160 has been chosen from the query helper Pass
Note: the transfer of the search term from the query helper and the augmentation of results from the term isn't particularly easy to accomplish, or it isn't obvious how to accomplish this successfully, because the iRefScape panel is hidden in the main window (a Cytoscape bug which appears to switch the visible panel all the time) and because a new search is required (without a new view being created, which is potentially how the original search might be set up).
IPI
ipi
Taxon id: Any
Iterations: 1
Create new view: no
Use canonical expansion: no
Initiates query helper Pass
IPI00543858
26 nodes, 67 edges Pass
72854<-->72866
mass
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
The query helper is shown. Upon transferring the 4 suggestions into the query box and searching again, 5 nodes are retrieved. Pass
Note: the nodes are not laid out in a nice way, probably because no edges connect them.
72854 kda
mass
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
No results are returned Pass
11401546
PMID
Taxon id: Any
Iterations: 0
Create new view: yes
Use canonical expansion: no
4 nodes and 7 edges are returned. Three edges have PMID 11401546 and these involve the 4 nodes shown. All other edges (from different PMIDs) involve these proteins.
11401546.1
No results are returned
1140154
No results are returned
SPTAN1
No results are returned
11401546
SPTAN1
No results are returned
10551855
11401546
6 nodes and 27 edges
10551855|11401546
6 nodes and 27 edges
10551855| 11401546
6 nodes and 27 edges
10551855 | 11401546
6 nodes and 27 edges
10551855 [tab] 11401546
6 nodes and 27 edges
10551855, 11401546
6 nodes and 27 edges
10551855 11401546
No results are returned (since space-delimited queries are not supported)
The following example searches are listed in the Using the Search Panel documentation.
Q7KSF4
UniProt_Ac
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: yes
67 nodes, 146 edges
Notes: 4 nodes are returned directly by the query, but only one is marked with i.query = Q7KSF4. FAIL nodes returned by a query (even with canonical expansion) should have an i.query value. i.order is 0 for Q7KSF4 but 10 for the other three nodes from the same canonical group. CAUTION. This is not what the documentation says for these attributes. With canonical expansion off, this search returns 43 nodes, 43 edges all from BioGRID.
NP_996224
RefSeq_Ac
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: yes
67 nodes, 146 edges
Notes: See above. i.query feature fails to update to reflect the most recent search. FAIL.
Q7KSF4_DROME
UniProt_ID
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: yes
67 nodes, 146 edges
42066
geneID
67 nodes, 146 edges
See above. Now two nodes are marked as Q7KSF4 under i.query. FAIL. 42066 should be listed for the recently returned node.
cher
geneSymbol
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: yes
67 nodes, 146 edges
Now i.query says Q7KS4 for all four nodes returned by the search. FAIL.
72854<-->72866
mass
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: yes
40 nodes, 94 edges
Four molecular mass values are returned by the query helper. Selecting all of these and doing the search returns 8 hi-lited nodes and their interactors. The 72855 mass node returns 1 node with that mass and two other members of the same canonical group. Two of the nodes are returned with i.query of Q7KSF4. FAIL.
10121899
rog
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: yes
This should return the Q7KSF4 node
Instead got "Sorry, please wait until current operations finish or stop the proces and restart Cytoscape." Subsequent searches do not work. Have to restart Cytoscape
14605208
PMID
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: yes
929 nodes and 1605 edges returned all with PMID of 14605208
Same results if iteration is set to 0. Ok. Same results if canonical expansion is de-selected. Ok.
47513
src_intxn_id
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: yes
2 nodes and 1 edge returned
EBI-212627
src_intxn_id
2 nodes and 4 edges returned (2 from intact, 1 from BIND and 1 from MINT)
147805
src_intxn_id
Returns 4 nodes and three interactions because BIND and BioGRID interaction id space overlap
227650
omim
74 nodes and 224 edges returned
449
digid
58 nodes and 60 edges returned
This should return the same results as omim 227650 plus more nodes that have the same digid. digid search is like searching for multiple omims. Problem with file name _EXT__ROG_digid.irft
fanconi
dig_title
Taxon id: Any
Iterations: 1
Create new view: yes
Use canonical expansion: yes

Invalid input tests

Query Search Type Options Expected Result Pass/Fail
0
RefSeq_Ac
No results are returned
0
UniProt_ID
No results are returned
0
geneSymbol
No results are returned
0
geneID
No results are returned
0
mass
No results are returned
0
pmid
No results are returned
23
UniProt_ID
No results are returned Pass
-1
mass
No results are returned
-1
pmid
No results are returned
0000
geneSymbol
No results are returned
00001
geneID
No results are returned
12345
geneSymbol
No results are returned
abcd
ipi
No results are returned
abcde
RefSeq_Ac
No results are returned
abcde
UniProt_ID
No results are returned
abcde
geneSymbol
No results are returned
abcde
geneID
No results are returned
abcdes
geneID
No results are returned
MW
mass
No results are returned

Not currently tested

  • src_intxn_id search 1
  • omim search 1
  • digid search 1
  • audit against external database - Intact
  • audit against external database - MINT
  • audit against external database - BioGRID
  • iterations 1
  • use canonical expansion 1

User interface notes

Many search types such as UniProt_ID now lead to exact-only searches. The production of results should not be allowed for imprecise protein names, for example, since the user might have entered gene names, selected UniProt_ID by mistake and would not be aware of their mistake because their search returned results. Also, since the first few characters of UniProt_ID search terms may be shared by multiple proteins from different organisms, an inexact match would need to trigger the query helper.

Generally, searches should provide predictable outcomes without resorting to the attribute browsers to discover which search terms produced which results. For example, AH2_ARATH which returns no results from an exact match search, should not encourage similar terms to be used for searching. Previously AH2_ARATH returned CAH2_ARATH. Imagine if the user accidentally had such a query term embedded in a long list. They would never detect this search error!

Where the taxonomy field is set to Any, a warning will be given. It is envisaged that the user will most frequently be working with a single organism's proteins or would at least tolerate being reminded that potentially irrelevant proteins might be searched for due to naming coincidences.

The iterations setting resets to 1 after a query, even one which led to the query helper being shown, where the query will be completed by trying the search again.

Exporting lists of attribute values should be as simple as selecting the values in the attribute browser and opening a context menu and copying the selection. However, it is also possible (when the context menus don't work) to use the "File" -> "Export" -> "Node Attributes" menu entry and to choose "i.geneID", then saving and processing the saved file to get a list. This seems to be rather unreliable, however.

Currently under review

The CXCR4 isoforms test can be used as a test case for the Export function "on Target network Node ID type"= i.Canonical_ROGID_TOP

Currently untested areas

  • Preferences
  • iRefScape menu
  • Right-click menu
  • Node attributes
  • Edge attributes
  • Wizard
  • Installation
  • Help system
  • Windows and sessions
  • Loading from file

To be corrected

  • Remove the non-proprietary flag/check for current data
  • Handle the neighbourhood completion when expanding network (do not use all the nodes)
  • show_inxc dynamic index behaviour change not working
  • Scaling GUI at low resolution, maximise button may get hidden
  • Path finding cancelling time
  • focus progress when path finding
  • Ending with collapsed node error
  • unselect all nodes before edge filtering

List of GeneIDs to test the new caonical expansion

All iRefIndex Pages